doing a respray on the xj6 div
Posted: Sat May 19, 2012 9:03 am
alot of the pics are missing as i dint think about taking them till after alot of work was done,
this is before
did a full strip bar engine and electics, used 40 then 180 then 1200 wet and dry on the frame, undercoated white, 4 coats, put wheels and so on back on ( otherwise id prolly forget were each bolt goes xD
this is frame with undercoat, put back together:
then sanded down all body pannels, body filled any inperfections, and sprayed the ones with white undercoat that were in good condition,
and here they are laying on the floor xD
all this took around 4 hours, but then needs a few days to hardend -_- was hopping to get a load more done this weekend but o well, btw anyone have a right hand pannel the one next to the seat from a 98 xj6? mine is totaly destroyed, could be fixed but the amount of fiberglass and body filler would ruin the lines of the bike thanks for reading
this is before
did a full strip bar engine and electics, used 40 then 180 then 1200 wet and dry on the frame, undercoated white, 4 coats, put wheels and so on back on ( otherwise id prolly forget were each bolt goes xD
this is frame with undercoat, put back together:
then sanded down all body pannels, body filled any inperfections, and sprayed the ones with white undercoat that were in good condition,
and here they are laying on the floor xD
all this took around 4 hours, but then needs a few days to hardend -_- was hopping to get a load more done this weekend but o well, btw anyone have a right hand pannel the one next to the seat from a 98 xj6? mine is totaly destroyed, could be fixed but the amount of fiberglass and body filler would ruin the lines of the bike thanks for reading