Radare's All-Inclusive Seca II Torque Specs

The basic forum. Want to show off your XJ or ask questions about it? Maybe you're not sure where to post? Put it here.
Post Reply
User avatar
radare
Site Founder
Site Founder
Posts: 10420
Joined: Mon Nov 07, 2011 12:42 pm
Location: Denver, CO
Contact:

US Model, XJ600 and Seca II, Torque Specs:
These are the factory torque specs for anything I could find a torque listed for. You can also download a text file with this information.

If you find an error, please post the correct torque and I'll get the list fixed.

Tune-Up Items:
  • Oil Drain Plug: 31 ft-lbs
    Oil Filter: 100 in-lbs
    Spark Plugs: 108 in-lbs
    Exhaust pipe flange nuts: 132 in-lbs
    Steering head bearing ring nut: 37 ft-lbs to seat and then 156 in-lbs
    Valve cover bolts: 86 in-lbs
    Fork caps: 17 ft-lbs

Engine, Clutch and Gearbox:
  • Cam chain tensioner cap bolt: 168 in-lbs
    Cam chain tensioner mounting bolts: 86 in-lbs

    Camshaft bearing cap bolts: 86 in-lbs
    Camshaft sprocket bolts: 17 ft-lbs

    Clutch boss nut: 50 ft-lbs
    Clutch cover mounting bolts: 86 in-lbs
    Clutch pressure plate bolts: 70 in-lbs

    Connecting rod cap nuts: 18 ft-lbs

    Crankcase bolts: 17 ft-lbs
    Crankcase plugs (M10): 105 in-lbs

    Cylinder block to crankcase nut: 168 in-lbs
    Cylinder block to cylinder head nuts: 86 in-lbs

    Cylinder head cap nuts: 16 ft-lbs

    Engine Mount bolts:
    • Front: 43 ft-lbs
      Rear: 64 ft-lbs
    Oil-Filter adapter bolt: 36 ft-lbs
    Oil pan mounting bolts - 86 in-lbs
    Oil pick-up mounting bolts: 86 in-lbs

    Oil pump assembly screws: 61 in-lbs
    Oil pump mounting screws: 61 in-lbs
    Oil pump screws: 61 in-lbs

    Primary drive gear nut: 36 ft-lbs

    Shift cam retaining plate screws: 61 in-lbs
    Shift cam stopper screw: 16 ft-lbs

    Shift lever pinch bolt: 86 in-lbs
    Shift pedal linkage locknuts: 86 in-lbs

    Starter chain guide bolts: 70 in-lbs
    Starter Chain tensioner bolts: 86 in-lbs
    Starter clutch Allen bolts: 18 ft-lbs

    Valve cover bolts: 86 in-lbs

Fuel & Exhaust Systems:
  • Exhaust pipe flange nuts: 132 in-lbs
    Exhaust pipe nuts: 168 in-lbs

    Muffler bolts:
    • M8 in size: 168 in-lbs
      M10 in size: 18 ft-lbs
    Exhaust pipe joint bolts: 168 in-lbs

    Carburetor heater thermoswitch (if equipped): 124 in-lbs

Ignition System:
  • Pick-up coil plate securing screws: 70 in-lbs
    Timing rotor bolt: 32 ft-lbs
    Signal generator cover screws: 86 in-lbs

Frame, Suspension & Final Drive:
  • Front Forks:
    • Cap bolt to fork: 17 ft-lbs
      Damper rod bolt: 22 ft-bs
    Handlebars & Steering Stem:
    • Upper triple clamp bolts: 17 ft-lbs
      Lower triple calmp bolts: 27 ft-lbs
      Handlebar bracket bolts (mounting bolts): 17 ft-lbs
      Handlebar end-weights: 19 ft-lbs
      Steering stem nut: 80 ft-lbs
      Steering headset bearing ring nut: 37 ft-lbs to seat and then 156 in-lbs
    Rear shock absorber bolts and nuts: 46 ft-lbs
    Swingarm pivot shaft nut: 66 ft-lbs

    Drive chain front sprocket nut: 80 ft-lbs
    Drive chain rear sprocket nuts: 43 ft-lbs
    Engine sprocket cover bolts: 86 in-lbs

Brakes, Wheels & Tires:
  • Caliper bracket mounting bolts: 25 ft-lbs
    Front caliper bracket Allen bolt: 17 ft-lbs
    Rear caliper pad retaining bolts: 86 in-lbs

    Front axle: 43 ft-lbs
    Front axle pinch bolts: 168 in-lbs

    Brake disc mounting bolts: 168 in-lbs
    Union bolts (banjo fittings on caliper & master): 22 ft-lbs

    Master cylinder mounting bolts:
    • Front: 78 in-lbs
      Rear: 17 ft-lbs
    Rear axle nut: 75 ft-lbs
    Torque link bolts and nuts ('92 to '96 model): 22 ft-lbs
    Torque link bolts and nuts (97+ model): 17 ft-lbs

Electrical System:
  • Neutral switch screws: 35 in-lbs (use loctite on these threads)

    Alternator:
    • Rotor bolt: 58 ft-lbs
      Cover Allen bolts: 86 in-lbs
    Starter mounting bolts: 86 in-lbs
    Regulator/Rectifier Allen bolts: 61 in-lbs

This topic has 3 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply