XJ 1997N/I.O.M.
Posted: Fri Dec 22, 2017 3:45 pm
Now I've introduced myself I now would like to start a thread regarding my project. I am going to make a Cafe racer/Project bike/Flatracker. I am trying to decide if I should go for a 17"rear wheel but kinda like original front end even though Its single disc and 38mm forks. Next thing is it's running fine at the moment but I see all sorts of posts regarding carburattion issues, what's the story? I intend to run open mouth trumpets.
Is it possible to match both wheels to 17" without changing swinging arm and forks.
I have sourced a 275mm Olhins rear shock but need advice on what to do with front end.
I have modified swinging arm to allow more room to get 4 x 31.75 pipes through for planned 4 into 4 exhaust system. Next what I am after is 2 x 4" / 5" nice twin headlight units. Anyhow if you have any thoughts on above let me know. Ta and Merry Christmas. Ronnie
Is it possible to match both wheels to 17" without changing swinging arm and forks.
I have sourced a 275mm Olhins rear shock but need advice on what to do with front end.
I have modified swinging arm to allow more room to get 4 x 31.75 pipes through for planned 4 into 4 exhaust system. Next what I am after is 2 x 4" / 5" nice twin headlight units. Anyhow if you have any thoughts on above let me know. Ta and Merry Christmas. Ronnie